If you are looking for Jewelers Saws then look no further. Travers has a huge variety of jewelers saws with more than 700 items to choose from. The brands available at Travers are KEO, Southern Carbide, TTC Production USA Made. The size of these jewelers saws varies from 1 inch to 6 inches and the thickness of these saws varies from 0.008 inch to 1/8 inch. Hole diameters for these jewelers saws fall between 3/8 inch to 1 inch. The number of teeth present on saws is an important factor and the number of teeth varies from 76 to 460 here. The tool materials that are used by these brands available here are high-speed steel and solid carbide. There are four types of finishing coatings available viz. bright, TiALN, TiCN, and TiN. Southern Carbide manufactures jewelers saws without keyways. The material used is solid carbide and the number of teeth present on these saws is 98 to 230. The hole diameter varies from 1/2 inches to 1 inch. Also, the size of these jewelers saws made by Southern Carbide ranges from 1 inch to 4 inches. TTC Production makes jewelers slotting saws. The material used here is high-speed steel. The different thicknesses available start from 0.008 inches. The number of teeth presents on these jewelers saws made by TTC Production range from 76 to 340. The size of these saws also lies between 1 inch to 6 inches. TTC Production USA Made has jewelers saws made of sizes 1 inch to 6 inches. The hole diameter also ranges from 3/8 inches to 1 inch. TTC Production USA Mode uses high-speed steel for its jewelers saws. The number of teeth available is 78 to 380. This is not all. There are many more jewelers saws available of different sizes, brands, materials, etc.