POWERMATIC TS29 51-1/2" x 33-1/2" Table Size 7-1/2 HP Horsepower Shaper
Product Specifications
| Brand | POWERMATIC |
|---|---|
| Model # | TS29 |
| Horsepower | 7-1/2 HP |
| Phase | 3 PH |
| Voltage | 230/460V |
| Table Size | 51-1/2" x 33-1/2" |
| Dust Collection Min. CFM | 800 CFM |
| Dust Port Diameter | 2 x 5" |
| Fence Size | 46" x 5" |
| Height | 53" |
| Length | 51" |
| Max. Diameter Cutting Above Table | 12" |
| Max. Diameter Cutting Below Table | 9" |
| Max. Spindle Diameter | 1-1/4" |
| Net Weight | 1100 lbs. |
| Prop. 65 | Yes |
| Reversible | Yes |
| Router Bit Collet Included | 1/4", 1/2" |
| Sliding Table Size | 11-1/4 x 51-1/4 |
| Spindle Capacity Under Nut | 3/4" spindle: 3-1/2", 1" spindle: 6", 1-1/4" spindle: 6-1/2" |
| Spindle Speed | 3,000, 4,000, 6,000, 8,000, 10,000 RPM |
| Spindle Tilt | 45° Forward, 5° Back |
| Spindles Included | 3/4", 1", 1-1/4" |
| Table Height | 35-1/2" |
| Table Inserts Opening Diameter | 2-1/5", 5-1/2", Oval (Tilting) |
| Table Opening Diameter | 5-1/2" |
| Weight | 1280 lbs. |
| Width | 44" |
| Country of Origin | IMPORT |
| Shipping Restrictions | TRUCK SHIP ONLY (DROP SHIP ITE |
Many metalworking products do contain metals that are included in the latest Prop 65 warning. Exposure to the elements can be harmful. May cause cancer and reproductive harm.
Details
The new TS29 Tilt/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.
Features
- Sliding table with 4-foot stroke works with miter head, hold-down and fence to accommodate everything from multiple end cuts to tenons.
- Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability.
- Large table with built-in slider with room for stock feeder.
- 7" vertical spindle travel allows stacked tooling.
- Spindle tilts negative 5° to positive 45° for increased versatility.
- Large diameter multiple table inserts accommodate virtually any size cutter.
- Five spindle speeds in forward and reverse with lighted indicator.
Technical Documents & Manuals
Reviews