MAG-MATE VLLUG1 Vertical Lifting Lug Attachment Type Magnetic Lifting Accessory

Benefits

• Safe to use on flat or round items.
• Internal on/off release device that does not contact or damage the surface of the parts.
• No electricity required for operation eliminating fear of dropping loads due to power failures.
• Holding values: flat from 275 to 1,200 lbs. round from 137 to 600 lbs.
• Vertical lift capable with optional lift lug attachment.
• Compact and lightweight design.
• Heat resistant up to 180°F (82°C).
• Conforms to ASME B30.20 standards.

Features

• Supports custom pole shoes.
• Stationary lift lug(s).
• Embedded RFID chip.
• 3:1 Design factor.

† Ships direct from factory.

Technical Data

• Rare earth magnet with a locking on/off handle & test load feature.

To Operate Test Feature:

• Pull spring loaded handle out and rotate it to the "TEST" position.
• Lift load approximately 2-3" to verify the magnet has the capacity to lift your load.
• Once verified, place load back down and turn the handle to the "ON" position.

Notes

• Lifting Values for the VersaLift™ Magnets are stated at 33% of the actual value.
• We recommend when lifting sheets over 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off.
• Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once.
• Round Lifting Values are based on ideal conditions.
• Consult the factory before specifying these magnets for use on round materials.