ETCH-O-MATIC EOM-1 Etch-O-Matic Starter Set Type, Electric Type of Power Etcher

ETCH-O-MATIC Starter Kit, Your All-in-one Etching Unit, for Versatile Markings. The ETCH-O-MATIC starter kit is the most economical marker unit you get in the market as it is offered at the lowest price and lasts long. You can efficiently use the toolkit in industries, plants, machine shops, and in all places where metal marking is required. The kit contains the ETCH-O-MATIC marker with a marking size of 7/8 x 1-3/4 inches, ground plate, electrical cord, the electrolyte solution (2 oz.) provided in a plastic bottle, ten stencils, an adapter clip, a neutralizer, and the instruction manual. This EOM-1 electric power etcher unit is 10 volts and 2 amps and includes a transformer. It can make marks on different metals around 0.003-inches deep in less than 30 seconds, and the marks stay longer. They can only be removed by grinding the surface of the parts deeper. You can make around 1,000 marks using this kit, and after that, you can avail of the refill supplies to get the same quality markings. It is the best toolkit for all light-duty marking tasks on your tools and parts. You can effortlessly etch marks even on round surfaces, including drill bits, pipes, milling cutters, tubings, etc. Using the special stencils provided, you can transfer the typed, written, drawn, or photo-processed information into different metal surfaces of tools, equipment, manufactured parts, and so on of any thickness. The unit uses an electrochemical principle, and thus, you can effortlessly make professional-looking permanent marks even on the hardest materials. ETCH-O-MATIC marks are easier and faster to make, and the kit can be used on saw blades, carbide cutters, feeler gages, knife blades, and other equipment. The marks successfully compete with the laser marks and have already been used on cars, trucks, hospital surgical instruments, aircraft (both commercial and military), implant devices, etc.

Benefits

• The best and most cost-effective ETCH-O-MATIC starter kit makes deep marks on flat and round tools and parts in less than 30 seconds.
• These long-lasting marks can only be removed by deep grinding the metal surface.
• With the special stencils in the kit, you can transfer the typed, written, drawn, or photo-processed information into surfaces of any thickness.
• Using an electrochemical principle, the unit can make professional-looking permanent marks even on the hardest materials.

Applications

Permanently marks metal, tools and other areas.

Features

• Lowest priced kit available anywhere, and it does the job in industry, in plants, machine shops, and everywhere metal marking is needed.
• The marker unit is 10 volts, 2 amps, and is excellent for light duty marking of tools and parts. (Transformer is inside marker unit)

PERMANENTLY MARKS ANYTHING METAL IN SECONDS!

• The Etch-O-Matic will etch anything that can be typed, written, drawn, or photo processed (on a special stencil) into the surface of anything made of metal: including tools, instruments, equipment, or manufactured parts.
• Your marks can be names, numbers, designs, logos, trademarks or even your own signature!
• Using an electro-chemical principle, the new Etch-O-Matic can etch as deep as .003" of an inch in less than 30 seconds, or mark the hardest tool steel and carbides almost instantly. ·It marks any flat or round metal surface down to 1/16" diameter and any metal thickness from thin foil up to the largest castings easily.
• Most marks, which look like printing or engraving, take about 3 to 20 seconds (the longer dwell times are for deep etching) and are permanently etched into the tool or manufactured part surface.

FAST AND VERY EASY TO USE!

• The Etch-O-Matic is fast and easy to use.
• Anyone in your organization can become an expert in just minutes and produce professional looking marks quickly.
• In fact, Etch-O-Matic is by far the easiest marking system to learn that is available today!
• You will also find that Etch-O-Matic, while being the fastest way to make permanent marks on anything metal, is by far the least expensive method on the market today.
• Your marks will cost just fractions of a cent to produce, and you will be extremely pleased with the result.

COMPARES WITH LASER MARKS

• Most marks made by the Etch-O-Matic will compare favorably with laser marks on metal, and are easier and sometimes even faster to make.
• You have very likely seen marks made by Etch-O-Matic hundreds of times before, especially since the marks are used so often in commerce today.
• If you have ever seen a feeler gauge, drill bit, milling cutter, saw blade, knife blade, ball bearing race, carbide cutter or thousands of other types of metal tools, parts, instruments or equipment then you have probably seen marks made by the Etch-O-Matic system.
• In fact, Etch-O-Matic has created marks in a percentage of all of the cars, trucks, commercial and military aircraft, submarines, hospital surgical instruments and implant devices. ·Etch-O-Matic has even been used to mark the nose cone of the space shuttle!

Includes

(1) 2 oz. general purpose electrolyte, (1) Pack of (10) stencils: 2-1/4" x 3" (marks area 1-7/8" x 7/8"), (1) Ground plate, (1) Adapter clip (regular), (1) Neutralizer powder pack, (1) Instruction sheet.