EDGE TECHNOLOGY 30-000 6" Dia 1/2" to 1-5/8" Thickness Lathe Chuck Stop

Machine Shop Solutions

Problem: Facing smaller and shorter parts can require soft jaws and other spacers, which add extra machining and readjustment time. Solution: The magnetic design combines with a centering plug for easy application, and 10 sets of height options offer compatibility for a wide range of sizes.This 16-piece chuck stop set from Edge Technology is your best option for machining below the jaw for 6 inches diameter chucks. The Chuck Stop by Edge Technology is designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. The Chuck Stop uses different height parallel bars to achieve the required spacing. A centering plug is used to keep the unit centered to the internal diameter of the chuck. The magnetic design combines with a centering plug for easy application. Paper-thin with parallelism accuracy of ±0.0002 inch keep the parts where you need them. This particular works well with smaller and shorter jobs with repeatability. These spacers are designed especially for a minimum 6 inches three-jaw chucks. Travers is offering here 10 sets of height options that offer compatibility for a wide range of sizes. 10 sets of different height parallel bars achieve the required spacing. Edge Technology Tool is a leading manufacturer of milling and lathe machinist tools. This American-made brand offers a full lineup of indicators, gages, chucks, vises, and much more. Every product here is designed with the intent to minimize set-up times and maximize production during tool offsets.

Benefits

• Stays centered always.
• The chuck stop set uses a set of hardened steel parallel bars to accurately space parts away from the chuck face.
• Eliminates the need to machine soft jaws.
• Increases productivity & saves set-up time.
• Allows small and short parts to project past the chuck jaws, and not fall inside the bore.
• 10 sets of height options offer compatibility for a wide range of sizes.

Applications

• Designed for 6" three-jaw chuck only.
• Accurately locate parts beyond the chuck jaws to provide clearance for facing operations.
• Ideal for working smaller workpieces.
• Ideal for shorter jobs with repeatability.
• Place your part in your chuck without measuring every time.

Features

• 16-piece chuck stop set for 6 inches chuck.
• Front and back surfaces are parallel within ±0.0002".
• The chuck stop locates on chuck ID with the use of a centering plug.
• Strong neodymium magnets provide a secure hold.
• Modular design.
• Anodized aluminum finish.
• Available in red.

Includes:

• (10) Sets of hardened parallel bars (heights from 1/2" to 1-5/8" in 1/8" increments) with the case.
• (6) Centering plugs: diameters 1.4", 2.0", 2.5", 3.0", 3.5", and 4.0"

Includes

• (10) Sets of hardened parallel bars (heights from 1/2" to 1-5/8" in 1/8" increments) with case.
• (6) Centering plugs: diameters 1.4", 2.0", 2.5", 3.0", 3.5", and 4.0"