From Chamfering, Deburring to Countersinking, Travers offers a wide range of Single Flute Countersinks for any desired application. We have an exclusive range of Carbide, Cobalt, High Speed Steel, and M42 8% Cobalt Single Flute Countersinks designed for machine and portable work at low & high speeds. The countersinks are available with the coatings TiN, TiAlN or in bright surface treated finish. The range of Single Flute Countersinks on display are well-suited for post processing of already machined holes on softer materials including aluminum, plastic, wood. Single Flute Countersinks come in use when multi-flute countersinks chatter or the hole is too small for a multi-flute countersink to enter. The tool proves to be much handy when trying to insert a bolt, nail, or screw flush with the drilled material. We have Single Flute Countersinks in standard sizes of ? inch, extending up to 3 inches. The shank diameter on countersink cutters on display range between ? inch to � inch. The included angle on the Single Flute Countersinks on display vary between 60�, 82�, 90�, 100�, 110� and 120�. Machinists prefer Single Flute Countersinks for chatterless operation and smooth surface finish. Results from using 60� for deburring, 82� for countersunk screws US standard, 90� for countersunk screws and 120� for countersunk sheet metal rivets, indicates good performance. Now choose from over 350 types of Single Flute Countersinks in all standard sizes, included angles, shank diameters, and multiple tool material, only on Travers.