KUKKO K-2030-10+S 2 And 3 Jaw External And Internal Puller Set Type, 5-1/2" Tons Capacity, 4-3/4"' Maximum Spread Mechanical Puller
Item #
99-017-246
- Brand: KUKKO
- Model #: K-2030-10+S
- Type: 2 And 3 Jaw External And Internal Puller Set
- Capacity: 5-1/2" Tons
Product Specifications
| Brand | KUKKO |
|---|---|
| Model # | K-2030-10+S |
| Type | 2 And 3 Jaw External And Internal Puller Set |
| Capacity | 5-1/2" Tons |
| Maximum Spread | 4-3/4"' |
| Maximum Reach | 13-3/4" |
| Application | Removing Bearings, Gears, Discs, Bushings, Seals etc.. In Tight Fitting Areas. |
| Approximate Power | 5.5 Tons |
| Forcing Screw | 14mm x 160mm |
| Jaw Opening | 4-3/4"' |
| Jaw Thickness | 1/8" |
| Jaw Width | 1-3/16" |
| Load Capacity | 5.5 Tons |
| Prop. 65 | Yes |
| Tool Material | Cast steel |
| Weight | 18.74 lbs. |
| Country of Origin | GERMANY |
Many metalworking products do contain metals that are included in the latest Prop 65 warning. Exposure to the elements can be harmful. May cause cancer and reproductive harm.
Details
Benefits
- A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
- Variable reach thanks to optional jaw extensions.
- Can be installed on various pulling hooks.
- Turning the pulling hooks enables them to be used both internally and externally.
- Suitable for pulling asymmetric workpieces.
- 2-arm cross bar with hexagonal profile for good grip.
- Spindle head band prevents the wrench from slipping off.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Applications
Removing Bearings, Gears, Discs, Bushings, Seals etc.. In Tight Fitting Areas.Features
- Strong design, high performance, and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
- Safety label to ensure protection of intellectual property.
- 8-in-1 kit in the tried-and-tested KUKKO-L-Boxx-System.
- The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
- Flexibility assured thanks to two-arm or three-arm design.
- Thin pulling jaws in various lengths with quick-adjusting capability.
- Parallel pulling hooks in every position, even with full load.
- Pulling hooks with infinitely variable adjustment on the cross-beam.
- Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
- Short and long mechanical pressure screws.
- Milled thread treated with special coating.
- If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
- Quality made in Germany.
Reviews